SKU: ISW-501T
| Hardware Specifications | |
|---|---|
| Hardware Version | 3 |
| Copper Ports | 5 x 10/100BASE-TX RJ45 TP auto-MDI/MDI-X, auto negotiation |
| Connector | Removable 6-pin terminal block Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2 |
| Alarm | Provides one relay output for power failure; Alarm relay current carry ability: 1A @ DC 24V |
| LED | 3 x LED for system and power: Green: DC Power 1 Green: DC Power 2 Red: Power Alarm 1 x LED for each copper port: Green: 10/100Mbps LNK/ACT |
| ESD Protection | 6KV |
| EFT Protection | 6KV |
| Power Requirements | 12~48V DC, redundant power with reverse polarity protection, 24V AC power support |
| Power Consumption/ Dissipation | Max. 0.9 watts/3.07BTU (Power on without any connection) Max. 1.6 watts/5.45BTU (Ethernet full loading) |
| Installation | DIN-rail kit and wall-mount ear |
| Enclosure | IP30-rated metal case |
| Dimensions (W x D x H) | 32 x 87.8 x 135mm |
| Weight | 400g |
| Switch Specifications | |
| Switch Processing Scheme | Store-and-Forward |
| Address Table | 1K |
| Shared Data Buffer | 448K bits |
| Flow Control | Back pressure for half duplex, IEE 802.3x pause frame for full duplex |
| Switch Fabric | 1Gbps |
| Throughput (packet per second) | 0.74Mpps |
| Network Cables | 10/100BASE-TX Cat. 3, 4, 5, 5e, 6 UTP cable (max. 100 meters) EIA/TIA-568 100-ohm STP (max. 100 meters) |
| Standards Conformance | |
| Standards Compliance | IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3x Full Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet PROFINET Traffic Pass-through with QoS |
| Regulatory Compliance | FCC Part 15 Class A, CE |
| Stability Testing | IEC60068-2-32 (free fall) IEC60068-2-27 (shock) IEC60068-2-6 (vibration) |
| Environment | |
| Temperature | Operating: -40~75 degrees C Storage: -40~75 degrees C |
| Humidity | Operating: 5% to 95%, Storage: 5% to 95% (non-condensing) |
| Ordering Information | |
|---|---|
ISW-501T |
5-port 10/100TX Industrial Fast Ethernet Switch |
