SKU: IGS-500T-E
| Hardware Specifications | |
|---|---|
| Copper Ports | 5 x 10/100/1000BASE-T RJ45 TP auto-MDI/MDI-X, auto negotiation |
| Connector | Removable 4-pin terminal block Pin 1/2 for Power 1; Pin 3/4 for Power 2 DC Jack Connector |
| DIP Switch | Standard Mode: In Standard Mode, all interfaces can communicate with each other, supporting a transmission distance of up to 100 meters with an adaptive transmission rate of 10/100/1000Mbps. Extend Mode: |
| LED | 1 x LED for system and power: Green: DC Power 1 1 x LED for each copper port : Green: 10/100/1000Mbps LNK/ACT |
| Power Requirements | 12~55V DC redundant power with revise polarity protection |
| Power Consumption / Dissipation | Max. 0.55 watts/1.88 BTU (Power on without any connection) Max. 1.65 watts/5.63 BTU (Ethernet full loading) |
| Dimensions (W x D x H) | 30.2 x 76.1 x 100 mm |
| Weight | 266g |
| Enclosure | IP40 metal case |
| Installation | DIN-rail kit and wall-mount ear (Side wall mount is an optional accessory) |
| ESD Protection | 6KV |
| EFT Protection | 6KV |
| Network Cables | 10/100/1000BASE-T Cat. 3, 4, 5, 5e, 6 UTP cable (max. 100 meters) EIA/TIA-568 100-ohm STP (max. 100 meters) |
| Switch Specifications | |
| Switch Processing Scheme | Store-and-Forward |
| Switch Fabric | 10Gbps |
| Throughput (packet per second) | 0.744Mpps@64bytes |
| Address Table | 2K entries |
| Shared Data Buffer | 3M bits |
| Flow Control | Back pressure for half duplex IEEE 802.3x pause frame for full duplex |
| Standards Conformance | |
| Standards Compliance | IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet |
| Regulatory Compliance | FCC Part 15 Class A, CE |
| Stability Testing | IEC 60068-2-32 (free fall) IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration) |
| Environment | |
| Temperature | Operating: -40~75 degrees C Storage: -40~85 degrees C |
| Humidity | Operating: 10~90% Storage: 5~95% (non-condensing) |
