Imagine cu titlu de prezentare

Industrial 8-Port 10/100BASE-TX + 2-Port 10/100/1000BASE-T + 2-Port 1000BASE-X SFP Ring Ethernet Switch IFGS-1222TF

SKU: IFGS-1222TF

Industrial 8-Port 10/100BASE-TX + 2-Port 10/100/1000BASE-T + 2-Port 1000BASE-X SFP Ring Ethernet Switch (-40 to 75 degree C, dual 9~48V DC/24V AC, Fiber ports Switch/Ring mode via DIP switch, super-fast, fault-tolerant ring redundancy, PROFINET traffic pass-through with QoS)

671.50 lei (TVA inclus)

Precomandă

Discounturi disponibile pentru categorie

Comenzi peste 2500 lei → 3% reducere
Comenzi peste 5000 lei → 5% reducere
Comenzi peste 10000 lei → 10% reducere

Hardware Specifications

10/100TX Copper Ports

8 x 10/100BASE-TX RJ45 TP
Auto-MDI/MDI-X, auto-negotiation, Port 1 to Port 8

10/100/1000T Copper Ports

2 x 10/100/1000BASE-T RJ45 TP
Auto-MDI/MDI-X, auto-negotiation, Port 9 to Port 10

1000X SFP Slots

2 x 1000BASE-X SFP interfaces, Port 11 to Port 12

DIP Switch

DIP Switch	Position	Function
Mode	OFF	Ring
Mode	ON (default)	Switch Mode

Note :
1.Power off the IFGS-1222TF before adjusting the DIP switch and then power it on.
2.With a simple ring network with 8 units, the recovery time of data link can be as fast as 1ms.
3.Ring performance may vary depending on the length of the fiber optic and UTP cables.

Connector

Removable 6-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2

Alarm

Provides one relay output for power failure
Alarm Relay current carry ability: 1A @ DC 24V

ESD Protection

±6KV air gap discharge
±6KV contact discharge

Surge Immunity

6KV DC

Enclosure

IP30-rated metal case

Installation

DIN-rail kit and wall-mount ear

Dimensions (W x D x H)

50 x 86.4 x 135 mm

Weight

545g

Power Requirements

DC 9~48V or AC 24V
Redundant power with reverse polarity protection

Power Consumption / Dissipation (Full Loading)

DC 9V: 4.6 watts/15.6BTU
DC 48V: 6 watts/20.4BTU
AC 24V: 5.7 watts/19.4BTU

LED

3 x LED for System and Power:
　Green: DC Power 1
　Green: DC Power 2
　Red: Alarm
1x LED for Per Copper Port (Port-1~Port-8):
　Green: 10/100 LNK/ACT
2 x LED for Per Copper Port (Port-9~Port-10):
　Green: LNK/ACT
　Amber: 1000
1 x LED for Per SFP interface (Port-11~Port-12):
　Green: 1G LNK/ACT

Switch Specifications

Switch Processing Scheme

Store-and-Forward

Switch Fabric

9.6Gbps

Throughput (packet per second)

7.14Mpps@64bytes

Address Table

4K entries

Jumbo Frame

16K bytes

Flow Control

Back pressure for half duplex
IEEE 802.3x pause frame for full duplex

Standards Conformance

Standards Compliance

IEEE 802.3 Ethernet 10BASE-T
IEEE 802.3u Fast Ethernet 100BASE-TX
IEEE 802.3ab Gigabit Ethernet 1000BASE-T
IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LX
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.1p Class of Service (Works under Ring function disable)
PROFINET Traffic Pass-through with QoS

Regulatory Compliance

FCC Part 15 Class A, CE

Stability Testing

IEC60068-2-32 (Free fall)
IEC60068-2-27(Shock)
IEC60068-2-6 (Vibration)

Environment

Temperature

Operating: -40~75 degrees C
Storage: -40~75 degrees C

Humidity

Operating: 5~95% (Non-condensing)
Storage: 5~95% (Non-condensing)